|
Diode LED offers a full range of 12V DC Power Supplies, Controls and Wiring
Accessories that allow for consistent and simple installation of all of their LED products.
Engineered and Designed in the U.S.A. |
|
|
DIODE LED ACCESSORY LINKS
|
CLICK IMAGE for LARGER VIEW
WIRE BOXES |
|
|
|
|
|
|
• Reinforced protected terminal block |
• Compliant to EN/IEC 60998 |
• For use with solid or stranded wire up to 14G |
|
|
|
|
For Indoor / Dry Location Class 2 Installations |
|
For Outdoor Wet Location Class 2 Installations |
|
• UL Recognized Component. • Includes 3-wire push-in terminal block connector. • Input terminal accepts 20 – 18 AWG cable. • Output terminal accepts 20 – 14 AWG cable. • Max Voltage Rating: 300V • Max Amperage Rating: 10A |
|
1.87" x 1.0"
x 0.75" |
7.7" x 1.8"
x 4.9" |
11.25" x 1.8"
x 3.75" |
13.5" x 1.8"
x 4.5" |
15.5" x 6.5"
x 2.6" |
2.6" x 1.5"
x 1.0" |
2.6" x 1.6"
x 1.0" |
DC CONNECTORS |
|
42" x 0.45" |
42" x 0.45" |
39.4" x 0.5" |
DC CONNECTORS |
|
5.7" x 0.4" |
8" x 0.6" |
8" x 0.6" |
8" x 0.6" |
|
CLICK IMAGE for LARGER VIEW
|
Connects the Light Bar to a Plug-In Adapter and other DC accessories. |
|
Creates an extension between Light Bars. |
|
Connects the Light Bar to a Hard-Wired Driver. Pair included with each bar. |
|
Pack of 10 End Caps.
45g Tube of Sealant. |
|
7.5” Length x 0.4” / 0.3" Width |
0.3” Width |
4.7” Length x 0.3” Width |
|
BACK to TOP
CLICK IMAGE for LARGER VIEW
CLICKTIGHT STRIP CONNECTORS
The CLICKTIGHT™ Strip Light Connector performs as a simple, secure connection for the whole line of indoor Diode LED Strip Lights. This connector accessory eliminates the need to solder, and is more secure than the standard Strip Light Connector. It features a special strip light locking connector at one end and optional opposite ends for a DC Plug, Spliced leads, or another locking connector for strip-to-strip connections. |
For 8mm Wide BLAZE, BLAZE BASICS, FLUID VIEW, ULTRA BLAZE and AVENUE 24 |
|
For 10mm Wide ULTRA BLAZE, VALENT and VALENT HD |
|
|
|
0.6" |
0.6" |
0.7" x 0.4" x 0.1" |
0.7" x 0.4" x 0.1" |
TAPE LIGHT TERMINAL BLOCK CoNnectors
Create easy, fast, and secure tape light connections with the new Tape Light Terminal Block Connector. It features screw down connections and a small form factor for minimal presence in tight spaces. |
|
 |
12 - 24VDC |
12V - 5A / 24V - 4A
|
16 AWG - 20 AWG |
0.45"L x 0.40"W x 0.30"H in |
Indoor |
5 Year |
|
 |
|
Dimensions on Spec Sheet |
BACK to TOP
CLICK IMAGE for LARGER VIEW
WIRE MANAGEMENT FASTENERS |
|
For use with 16/2, 18/2, 20/2, 20/3, 20/4, 20/5 AWG Wire |
|
For use with 20/2, 20/3, 20/4, 20/5 AWG Wire |
|
For Use with CL-2, RJ45, XLR, AC Power Cord |
|
Maximum: 0.4" / 10mm Width LED Tape Lights |
|
0.84" x 0.3" x 0.2" |
0.57" x 0.37" x 0.22" |
0.87" x 0.39 " x 0.35" |
0.87" x 0.2" x 0.1" |
|
BACK to TOP
CLICK IMAGE for LARGER VIEW
MOUNTING CLIPS |
|
0.9" x 0.2" x 0.2" |
0.6" x 0.5" x 0.4" |
0.75" x 0.5" x 0.4" |
$82.35 |
BACK to TOP
|
|