|
|
|
• Tape sections are IP-68 rated
--Allows for submersion up to five feet |
• Low profile 1/2" W x 1/8" H |
• our mounting options for many outdoor applications |
| • Power supply is UL listed for wet locations |
• Bright, low voltage, energy efficient, LED outdoor tape light |
• Available in 5 colors
--Amber, Blue, Green, Red and White |
• Comes in 1ft, 5ft and 10ft sections |
• May be cut to length every 2" or at the end of every run |
| • Minimum run length of 1' and maximum of 40' |
• 50,000 hour potential life |
|
|
 |
24V InvisiLED is as easy to Install as peel and stIck. Whether you have a new construction or remodeling project, 24V InvisiLED can update your design with a "green" solution to lighting spaces unimaginable before.
24V InvisiLED offers such an extremely low profile that you will wonder where the light is coming from! Flexible and available in a variety of colors, it can be installed in a wide variety of applications. |
|
 |
| • Low Power Consumption (2 watts/ft.) |
| • Long Life (up to 50,000 hours) |
| • Crisp, Quality Light |
| • Temperature Tolerance: -4° to 122° F |
| • Relative Humidity: up to 95% |
| • Virtually Invisible Installation |
| • Flexibility to Accommodate Curves Effortlessly |
| • UL and CSA Listed for WET Locations |
| • Lightweight and Durable |
| • Crafted in a Sealed Thermoplastic Enclosure for Long Lasting Durability |
|
| • Available in Amber, Blue, Green, Red and White |
| • Dimmable with Electronic Low Voltage (ELV) Dimmer |
| • Operates on 24V-AC Class II Power Supply |
| • Less then 1/8 Inch High and Approximately 1/2 Inch Wide |
| • Diodes Spaced Evenly 1 Inch Apart |
| • 1 ft., 5 ft. and 10 ft.Sections Available |
| • Field Cuttable Every 2” for 24v |
| • May Also Cut to Length at the End of a Run |
| • 3M™ Adhesive Backing for Easy and Reliable Installation |
| • Minimum Run Length of 1’ and Maximum of 40’ |
| • Five Year Warranty |
|
| CLICK BELOW FOR PDF CATALOG |
 |
|
|
| 24V IOUTDOOR nvisiLED COLORS |
|
|
BACK to TOP
CLICK IMAGE for LARGER VIEW
| 24V InvisiLED |
 |
| 1 Foot Section / 5 Foot Section / 40 Pack 1 Foot Sections |
|
|
BACK to TOP
CLICK IMAGE for LARGER VIEW
BACK to TOP
CLICK IMAGE for LARGER VIEW
| 24V OUTDOOR InvisiLED MOUNTING CLIPS / RETROFIT CHANNEL |
 |
 |
 |
 |
| For installation on non-flat surfaces where there is no edge contact. Two mounting clips per foot are recommended for straight runs. |
|
| For installation on non-flat surfaces, allows for contact on one edge. Two mounting clips per foot are recommended for straight runs. |
|
| For installation on non-flat surfaces, allows for contact on both edge.s Two mounting clips per foot are recommended for straight runs. |
|
| Rigid, non-flexible channel for mounting to a straight, solid surface |
|
| 1 1/8L x 3/8W x 1/4H |
3/4L x 3/8W x 1/4H |
5/8L x 5/8W x 5/8H |
12L x 5/8W x 1/4H
60L x 5/8W x 1/4H |
|
|
|
$40.50 |
BACK to TOP
| OUTDOOR InvisiLED GUIDELINES |
|
BACK to TOP
| MOUNTING INSTRUCTIONS |
 |
 |
| For use on flat surfaces allowing for contact on both edges, such as small recesses or coves. Channel is not flexible. Simply screw channel to surface and easily snap INVISILED™ into place |
|
For use on non-flat surfaces where there is no edge contact, such as curved or irregular walls. Clips are secured over INVISILED™
section by two screws. Two clips per foot are recommended
for straight runs, additional clips may be necessary for securing sections near a connection. |
|
 |
 |
| For use on non-flat surfaces allowing for contact on one edge, such as wooden or concrete stairs. Clips are secured over INVISILED™ section using one screw. Two clips per foot are recommended for straight runs, additional clips may be necessary for securing sections near a connection. |
|
| For use on non-flat surfaces allowing for contact on both edges, such as curved or irregular recesses or coves. Simply screw clips into surface and easily snap INVISILED™ into place. Two clips per foot are recommended for straight runs, additional clips may be necessary for securing sections near a connection |
|
BACK to TOP
|
|