W•A•C InvisiLED Energy Efficient LED Tape Light W•A•C LIGHTING - QUICK SELECTOR W•A•C MAIN CATEGORIES Art Glass Wall Sconces Beauty Spots Commercial / Retail Lighting Counter Balance Adjustables Cove Lighting Display Lighting Flexrail1 (1 Circuit Line Voltage Monorail) Flexrail2 (2 Circuit Line Voltage Monorail) InvisiLED Tape Lighting Line Voltage Pendants Low Voltage Pendants Linear (Mini Track) Lighting Low Voltage Pendants Monopoints and MultiPoints Monorail (Low Voltage) Duorail (2 Circuit Low Voltage) Modernism Contemporary Lighting Norfolk Architectural Series Precision Spots for Standard Track Quick Connect Heads Quick Connect Mini Pendants Recessed Lighting Standard Track Lighting Surface Mount Lighting Transformers Undercabinet Lighting W2 Architectural / Commercial Lighting Flexrail2 2-Circuit Line Voltage Monorail Norfolk Architectural Series Pendants Precision 2-Circuit Track Track Precision Spots - Line Voltage Precision Spots - Low Voltage Precision Modules Click Below to Read Pledge: Click Below to Read Warranty:

INVISILED COLORS

AMBER BLUE GREEN

RED WHITE

BACK to TOP

---

CLICK IMAGE for LARGER VIEW

INVISILED
LED-T-1 / LED-T-5 / LED-T-1-25	LED-T-2IN / LED-T-2IN-10
1 Foot Section / 5 Foot Section / 25 Pack 1 Foot Sections Each unit has fi xed male and female connectors on each end. requires a minimum run length of 5 ft, and are limited to a maximum run of 25 ft per 60W class II power supply.	2 Inch Section LED Tape Light When used to supplement the main sections of tape light, intermediary sections before l connector or joiner cable may be re-connected without cutting.
Available in Amber (AM), Blue (BL), Green (GR), Red (RD) or White (WT)
LED-T-1 LED-T-5 LED-T-1-25   LED-T-2IN LED-T-2IN-10 LED COLOR COLOR TEMP. LUMENS Per FOOT 1 Foot Section 5 Foot Section 25 Pack 1 Foot Sections 2 Inch Section 10 Pack 2 Inch Sections AM 592nm* 22 $42.50 $198.75 $949.95 $7.95 $64.50 BL 471nm* 20 GR 523nm* 60 RD 627nm* 35 WT 3500K 90 $37.75 $169.95 $816.95 $6.95 $65.25
* The Color of a LED is Typically Measured in Wavelength Nanometer (nm). The Color Temperature of White Light is Measured in Kelvin (K).

BACK to TOP

---

CLICK IMAGE for LARGER VIEW

INVISILED Kit
	LED-T-KIT Contents Quantity Description LED-T-1-WT 25 LED Tape Light - 1 Foot Sections - White LED-T-2IN-WT 15 LED Tape Light - 2 Inch Sections - White EN-1260-P-AR-T 1 60W 12V Plug-In Power Supply EN-1260-RB2-T 2 60W 12V Remote Power Supply LED-T-IC2 2 3 Inch Joiner Cables LED-T-IC6 1 7 Inch Joiner Cable LED-T-IC12 1 13 Inch Joiner Cable LED-T-L 4 L - Connectors LED-T-EC 4 End Caps LED-T-CL 25 Mounting Clips
Everything a Contractor Needs for Several Installations in a Durable and Reusable Traveling Case.
$859.95

BACK to TOP

---

CLICK IMAGE for LARGER VIEW

INVISILED POWER SUPPLIES		INVISILED LEAD WIRES / JOINER CABLES
EN-1260-RB2-T	EN-1260-P-AR-T	LED-T-P-2 / LED-T-P-12	LED-T-IC2 / LED-T-IC6 LED-T-IC12 / LED-T-IC72
CLASS II REMOTE POWER SUPPLY	CLASS II PLUG-IN POWER SUPPLY	ADDITIONAL LEAD WIRES	JOINER CABLE
Input: 120V ac. Output: 12v. The remote power supply powers the InvisiLED with hard wiring. A 6 ft long lead wire is included.	Input: 120V ac. Output: 12v. A 6 ft long lead wire is included and plugs into any 120V outlet.	Alternative length of lead wires for plug-in or remote power supply. May be fi eld cut.	Connects two sections of InvisiLED.
$34.50	$41.50	LED-T-P-2 2 ft. $3.45 LED-T-P-12 12 ft. $10.45	LED-T-IC2 2 ft. $2.95 LED-T-IC6 12 ft. $3.45 LED-T-IC12 2 ft. $3.95 LED-T-IC72 12 ft. $5.65

BACK to TOP

---

CLICK IMAGE for LARGER VIEW

INVISILED "L" CONNECTOR / END CAP		INVISILED MOUNTING CLIPS / RETROFIT CHANNEL
LED-T-L	LED-T-EC	LED-T-CL	LED-T-RC
L CONNECTOR	END CAP	MOUNTING CLIPS	RETROFIT CHANNEL
L Connector has male and female connectors and is used for interconnection of a right angle of 90°. Polarity is not a factor.	Includes 1 cut end cap (0.5L x 0.31W x0.19H) and 1 male end cap (0.5L x 0.5W x0.19H). End caps should be used to terminate every run to protect against dust ingress. See installation instructions for details.	Mounting clips are recommended for installing InvisiLED on porous or uneven surfaces that are difficult to permanently adhere the sections solely using its self adhesive backing. 2 mounting clips per foot are recommended for straight runs. More may be necessary for curves or where 2 inch sections are used.	Retrofit channels are used to construct a miniature cove or light baffle in which InvisiLED may be concealed. The channel has a 3/32 in. slot every 1 inch and can be curved at a radius of 5.5 in. or greater. 1/2 in. screws are provided.
1.38L x 1.31W x 0.25H		0.5W - Sold in Qty. of 10	36.0L x 0.5W x 0.5H
$2.65	$0.85	$3.45	$5.65

BACK to TOP

---

INVISILED GUIDELINES
DESIGN GUIDELINES • 2-inch sections and L connectors are combined to make convenient 90° angle turns at any 2-inch interval. Joiner cables can also be used for carrying power between sections of a run and creating connections at any angle. • InvisiLED sections are field cuttable every inch at the indicated markings on the adhesive side. CAUTION : Cut sections may not be rejoined to start a new section. • To avoid cutting in the middle of a run, use a series of 2-inch tape lights before the L connector or joiner cables. • InvisiLED sections have no polarity for connection. Connectors may be used in either direction for left-hand or right-hand turns. • Minimum run length of 5 ft and maximum run of 25 ft per 60W Class II power supply. General Installation Instructions • InvisiLED is easy to install by simply powering the power supply and connecting the male and cut ends of the sections and connectors creating straight lines, any angled turns, or lengthwise curves. • Use end caps to seal the end of all runs. Cut end caps and male end caps are available. Terminate each cut segment with a cut end cap. Terminate the uncut end of the Tape Light with male end cap. • Behind each InvisiLED section is a 3M™ construction adhesive. Peel back the covering and press firmly onto smooth surfaces. • Use mounting clips or the retrofit channel to permanently secure InvisiLED to porous or textured surfaces. • Not recommended for use with dimming controls.

BACK to TOP