MonoRail, Mono-Points, Mounting and Wiring

LINKS this PAGE

RAIL and POWER FEEDS

TRANSFORMERS

CONNECTORS

RECESSED HOUSING ADAPTERS

SUPPORTS and EXTENSIONS

RAIL BENDER

ALL DIMENSIONS in INCHES
CLICK IMAGE for LARGER VIEW

RAIL AND POWER FEEDS
SINGLE CIRCUIT RAIL	SINGLE CEILING POWER FEED	DUAL CEILING POWER FEED	SLOPED CEILING POWER FEED	DIRECT END POWER FEED
95300 / 95301	95310	95311	95314	95313
• Single Circuit Rail • Minimum bending radius: 12" minimum bend radius for rail • Use 94130 bending machine or a plywood template.Hand/Machine bendable, field cuttable • Rated for 300 watts at 12 volts • Order appropriate connectors if joining Rail sections	• Supplies power to Rail system • Use with single-feed remote transformer • Includes Supply Wire	• Supplies power to two separate Rail sections • Use with dual-feed remote transformer • Note: One Transformer per circuit • Includes 95331-98 Connector, Supply Wire	• Supplies power to Rail system for vaulted ceilings • Angle adjustment allows Rail to be oriented parallel to floor  Use with 95348-98 or 95347-98 standoffs • Includes Supply Wire	• Supplies power to Rail system from remote, single-feed transformer • Mounts to wall and attaches at end of run • Includes 95331-98 Connector, Supply Wire
Brushed Stainless Steel (98)
48L x 1/4W x 3/4H 96L x 1/4W x 3/4H	5Dia x 3 5/8H	5Dia x 3 5/8H	5Dia x 7 1/2H	5Dia x 2 3/32Ext
$69.00 / $95.00	$52.00	$106.00	$45.00	$51.00

BACK to TOP

CLICK IMAGE for LARGER VIEW

RAIL AND POWER FEEDS		TRANSFORMERS
FLEXIBLE POWER FEED	MONO-POINT CANOPY	SURFACE MOUNT POWER FEED w/ TRANSFORMER	RECESSED HOUSING POWER FEED w/ TRANSFORMER	MULTI-TAP TRANSFORMERS
95312	95161	95305	95306	Multi-Tap Transformers Compensate for Voltage Drop on Long Secondary Runs to the Rail System. 94062-12 300W 12V Single Output 8 3/4H x 4 3/8W x 3 7/8Ext $229.00 94064-12 600W 12V Dual Output - 2 x 300W 9 1/2 H x 5 3/8W x 4 3/4Ext $329.00
• Supplies power to Rail system from remote, single-feed transformer • Mounts to ceiling or wall junction box • Used when junction box is not located directly above Rail • Maximum Cord Length: 56.5" "• Use with directional head and rigid standoff	• Converts pendant or directional rail fixtures (ordered separately) to mono-point canopy mount • Rail connector of fixtures adapt to threaded nipple on canopy • Note: Do not exceed 50w maximum lamp • See 95100-98, 95101-98, 95102-98, 95154-98, 95155-98, 95156-98 and 95200-98 • Includes 12 Volt, 50 Watt electronic transforme	• Integrated power feed and transfomer includes single circuit 300 watt, 12 volt magnetic toroidal transformer with 0% - 100% capacity and dimmability • Locate directly above Rail system • Includes thermal protection, and magnetic breaker	• Integrated power feed and transformer includes single circuit 300 watt, 12 volt magnetic torodial transformer with 0% - 100% capacity and dimmability • Non-IC remodel housing replaces existing 6" recessed housing • Locate directly above Rail system • Includes thermal protection, and magnetic breaker
Brushed Stainless Steel (98)				Black (12)
5 1/8Dia x51 5/8H (max)	5Dia x 1H	8 15/16Dia x 6 7/16H	7 5/8Dia x 3 1/4H w /Housing 11 3/16H
$77.00	$86.00	$399.00	$309.00

BACK to TOP

CLICK IMAGE for LARGER VIEW

CONNECTORS
CONDUCTIVE CONNECTOR	ISOLATING CONNECTOR	FLEXIBLE CONNECTOR	"T" CONNECTOR	"X" CONNECTOR
95332	95331	95330	95333	95334
• Joins Rail sections end-to-end providing electrical and mechanical connection • Applicable to field cut Rail	• Joins Rail sections and isolates power feeds allowing switching between Rail sections • Applicable to field cut Rail	• Joins Rail sections end-to-end with angle ranging 65° - 295°. • Applicable to field cut Rail	• Joins three Rail sections *Rail must be supported wiht three rigid or adjustable standoffs (sold separately) placed within 1- foot of each connector end • Applicable to field cut Rail	• Joins four Rail sections *Rail must be supported wiht three rigid or adjustable standoffs (sold separately) placed within 1- foot of each connector end • Applicable to field cut Rail
Brushed Stainless Steel (98)
1 5/16L x 3/8W x 7/8H	1 5/16L x 3/8W x 7/8H	3 5/32L x 3/8W x 7/8'H	5 9/16L x 4 7/16W x 7/8H	3 1/16L x 3 1/16W x 7/8H
$10.50	$11.25	$41.00	$41.00	$41.00

BACK to TOP

CLICK IMAGE for LARGER VIEW

RECESSED HOUSING ADAPTERS		RAIL STANDOFF SUPPORTS / EXTENSIONS
POWER FEED ADAPTER	MONO_POINT ADAPTER	RIGID STANDOFF	RIGID STANDOFF	SLOPED CEILING STANDOFF
95350	95351	95340	95341	95348
• Retrofits into existing recessed housing • Edison socket threads into housing socket to supply power to power feed • Mounts to most popular recessed housings ranging from 6 1/4" to 6 1/2" diameter with "C" shaped hooks internal to housing • Includes integral 60 watt - 150 watt electronic transformer	• Retrofits into existing recessed housing and converts pendant and directional rail fixtures to mono-point • Edison socket threads into housing socket to supply power to power feed • Mounts to most popular recessed housings randing from 6 1/4" to 6 1/2" diameter with "C" shaped hooks internal to housing • Includes integral 50 watt electronic transformer • Note: Do not exceed 50w maximum lamp • Use with 95100-98, 95101-98, 95102-98, 95154-98, 95155-98, 95156-98 and 95200-98.	• Used as support in rail system to compliment appropriate power feeds * Field cuttable stems may also be replaced with applicable Extension Stem to lower rail system from ceiling • Supports Rail system when using 95310-98 power feed • Stem is adjustable 1/4" to keep Rail system parallel when ceiling is uneven	• Used as support in rail system to compliment appropriate power feeds * Field cuttable stems may also be replaced with applicable Extension Stem to lower rail system from ceiling • Used with 95350-98 surface mount power feed transformer • Stem is adjustable 1/4" to keep Rail system parallel when ceiling is uneven	Used as support in rail system to compliment appropriate power feeds • Field cuttable stems may also be replaced with applicable Extension Stem to lower rail system from ceiling • Adjusts to any angle to position Rail parallel to floor
Brushed Stainless Steel (98)
7 5/8Dia	7 5/8Dia	7/8Dia x 3 9/16H	7/8Dia x 6 25/32H	15/16Dia x 7 7/16H
$219.00	$102.00	$27.00	$27.00	$46.00

BACK to TOP

CLICK IMAGE for LARGER VIEW

RAIL STANDOFF SUPPORTS / EXTENSIONS		RAIL BENDER
ADJUSTABLE CABLE STANDOFF	STEM EXTENSIONS	RAIL BENDING KIT
95347	• For greater flexibility and design options - for higher ceilings or to dramatically group fixtures with varying heights • Extension stems easily attach to directional or pendant lighting fixtures for a more customized look• Includes supply wire, gauge & length • Use with standoff powerfeed • Replaces existing stems of powerfeeds, supports, directional fixtures and surface transformers to increase hanging length • Cannot be used with 95350-98 recessed adapter ITEM LENGTH PRICE 95320 5" $5.00 95321 11" $9.00 95322 23" $18.00 95323 35" $27.00 95324 47" $35.00	94130
Used when Rail system drop is greater than 6". Ideal for generally straight runs • Cable provides clean, sleek, transparent apprearance • Spring wire grip at Rail connector allows ease of installation for adjusting cable length		For Field Bending All Rails • Adjustable Rollers to Bend Rail to Desired Radius • Use Multiple "Pass Throughs" to Achieve Smooth Bend
Brushed Stainless Steel (98)		Black
15/16Dia x 60H	1/4Dia	9 3/4H x 7 3/4W x 6Ext
$36.00		$179.00

BACK to TOP