CIRCUIT NO. 1 - LOWER CIRCUIT
1. Insert Fixture into the Track.
2. Rotate Adapter 90° until Arrow Points to the Polarity Line on the Track.
CIRCUIT NO. 2 - UPPER CIRCUIT
1. Lift Copper Tap shown in Yellow
2. Insert Fixture into the Track.
3. Rotate Adapter 90° until Arrow Points to the Polarity Line on the Track. |
|
| Two Switches on One Feed Circuit Provide the Convenience and Flexibility of Using Two Sets of Fixtures on a Single Run of Track. two Sets of Fixtures may be used to Light 2 Areas or for 2 Different Lighting Functions. 2-Circuit Track is an Economical way to Install 2 Systems from a Single Feed Point. One Circuit is Limited to 120V 20A (2400 Watts). |
|
| Two Switches on Two Feed Circuits Provide the same benefits and Convenience and Economy with the Added Benefit of Doubling the Electrical Load Capacity to 4800 Watts (2 x 2400 Watts). This is Ideal For Long Runs with Many Fixtures. Rated 3 Wire, 2-Circuit 120V / 240V, 60Hz, Single Phase with Grounded Neutral. |
|